Phone Lines icon GFI Support Home

Articles in this section

See more

How to manually update Cyren definitions in GFI MailEssentials

Author: Luis Fernandes Updated

Answer

PROBLEM

The antivirus definition update is failing.
Emails go to the FailedMails folder when the Engine fails to initialize.

ENVIRONMENT

  • GFI MailEssentials 
  • All supported environments

SOLUTION

There are two ways to initiate the update.

Solution 1

  1. Navigate to the following directory <GFI MailEssentials installation path>GFI\MailEssentials\Updater\Cyren
  2. Delete the following files:
  • cyren_current_revision.txt
  • cyren_current_revision.txt.checked
  • cyren_current_revision.txt.tmp
  1. Open Services.msc and restart the GFI MailEssentials AV Scan Engine and GFI MailEssentials Autoupdater services.
  2. Open MailEssentials Configuration and navigate to Email Security > Virus Scanning Engine > Cyren > Updates.
  3. Click Download Updates and click Apply.
  4. Verify that the definitions successfully installed on the Update status section.

Solution 2

When the above steps do not update the definitions, a manual update is required in order to clear the possible corrupt definitions out of the GFI MailEssentials directories. Follow the steps below in order to complete the manual update process.

  1. Open a browser and navigate to http://cdnupdate.gfi.com/
  2. Navigate to the following directory incav2 > cyren > C1 folder and click the cyren_current_version.c1.zip link to download the latest Cyren definitions.
  3. After the download has completed you will need to navigate to service.msc and stop the SMTP or transport service(note this will stop mail flow and queue the messages in exchange until restarted)
  4. In services.msc console locate and stop all GFI services related to MailEssentials.
  5. Extract the downloaded zip from step 2 to the following location <GFI MailEssentials installation path>\GFI\MailEssentials\Updater\Cyren 
  6. Overwrite when prompted.
  7. Navigate to the directory where you just extracted the files to from the previous step <GFI MailEssentials installation path>\GFI\MailEssentials\Updater\Cyren  and locate the file cyren.zip.
  8. Extract the cyren.zip to the following locations: <GFI MailEssentials installation path>\GFI\MailEssentials\AntiVirus\cyren and <GFI MailEssentials installation path>\GFI\MailEssentials\AntiVirus\backup\cyren.
  9. Overwrite when prompted.
  10. Start all services stopped in step 3 and 4.
  11. Open MailEssentials configuration and verify that the Cyren engine has been updated successfully with the latest version.

CAUSES

  • The definitions files were corrupted and that can cause update failures.
  • Third party antivirus or backup scanning of the GFI MailEssentials folders can corrupt definitions.
  • Content filter type check from firewalls can corrupt the MD5 checksum during the update process. Verify that the proper exclusions are configured on your firewall. See the following article for the current update sites needed to be excluded in your firewall. https://www.gfi.com/support/products/gfi-mailessentials/What-sites-are-used-for-GFI-Product-Updates

Related articles